CHANNEL

Ghia Steel has one of the largest inventories of structural steel Channel. Steel Channels, also known as a C-channel or Parallel Flange Channel (PFC), have a cross section that consists of a wide "web" and two "flanges" at each side of the web.

Channels or C-beams are often used where the flat side of the web can be mounted to another flat surface for maximum contact area. We also have many sizes of Galvanized channels in stock as well as Aluminum Channels.

​

Carbon Steel:

​

Ghia Steel has one of the largest inventories of Carbon Steel Channel.

All of the Carbon Steel Channel listed here is Standard A36 Channel, where the inside flange surfaces have a slope of approximately 16-2/3%, and all are 20 feet long.

The sizes listed below as Cx OR Cxx represent the width of the channel.

​

If you need 40 lengths, sizes, or grades not shown here:

Feel free to contact us.

 

Similarly, if you need Steel Channel in lengths cut to your specifications, just email us.

 

Galvanized:

​

Ghia Steel has one of the largest inventories of Galvanized Steel Channel in Texas.

All of the Galvanized Steel Channel listed here is Standard Channel where the inside flange surfaces have a slope of approximately 16-2/3% and all are 20 feet long.

The sizes listed below as Cx OR Cxx represent the width of the channel.

All are hot-dipped Galvanized A36 channels.

​

If you need 40 lengths or sizes not shown here, feel free to contact us.

 

Aluminum:

​

Ghia Steel has one of the largest inventories of 6061-T6 Aluminum Channel.

All of the Aluminum Channel listed here is Standard Channel where the inside flange surfaces have a slope of approximately 16-2/3%, and most are 25 feet long.

The sizes listed below as Cx OR Cxx represent the width of the channel.

All are 6061-T6 or 6063-T6 Aluminum.

​

If you need sizes or grades not shown here, feel free to contact us.